Homag "KAL 310/3/A3"
Homag "KAL 310/3/A3" TAPE ROCKET!
$28,000
Machine is still in production for live demo....
$28,000
Machine is still in production for live demo....
PC Front End
Model Year - 2004
460 V, 60 Cy, 3-Phase
Model Year - 2004
460 V, 60 Cy, 3-Phase
Description:
- 0.4-3mm Edge thickness capacity
- Minimum panel width - 55m
- Maximum panel thickness - 60mm
- Variable feed track 18-32 m/min (59-104 FPM)
- 80mm feed track pads with v-groove belt on top pressure beam
- Hot melt glue system "A34" with reversible glue roller applicator
- Pressure roll section with (1) driven and (2) idle rollers - manual adjustment through SIKO digital counters for different edge thickness
- HL-81 End Trimming Station (2 x 0.25 HP 12,000 RPM each)
- Top & Bottom fine/profile radius trim unit, tilts 0-30 degrees, SIKO digital adjustment
- 3mm Radius scrape station
- Buffing Unit, top & bottom # 4402 (.25 kW - 2,850 RPM) each motor
Click on image to enlarge
For more information on this product please contact Joe Hall at (503) 869-2485 or
info@hall-man.com.
info@hall-man.com.